F/W080327 -> 080418
1.Add SMART entry: ECC fail block count
2.Fix bug: PIO Read/Write sector with 256 sector count
3.Fix bug: SATA device return signature value

F/W080418 -> 080513
1.Fix bug: Identify Information, fix specific configuration
2.Add Security feature be MPtool selectable
3.Fix bug: 8G SSD (with CHR mode) Max capacity check
4.Clear Ubuntu v8.04 setup issue.
5.Clear DOS setup issue.

F/W080513 -> 080621
1.Modify wear leveling algorithm.
2.SMART, erase count report data.

F/W080621 -> 080625
1.ICH10R Compatibility.
2.PIO.

--------------------------------------------------------------------------------------------
MP tool v0.2.0
1.SN can be choose as Hex/Dec by INI's  "SNDecimal" 
2.device test fail not increase the SN

MP toolv0.3.0
1.Fix load a different flash type INI will not update the AUTO Bin file path
2.Modify QAA from 16G to 32G

MP tool v0.4.0

1.add "file system format".
2.add "set drive current".
3.support Intel flash type.
4.delete auto mode on defect table creation item.
5.auto create flash type selection with manual edit INI file.
6.updated document.

MP tool v0.4.2
1.Support serial number decimalism and hexadecimal.
  JMMassProd.ini file [SNDecimal]=1   decimalism
                      [SNDecimal]=0   hexadecimal
2.Clear multi-port  SSD, serial number can't add issue
3.Clear File system format issue.

MP tool v0.4.3
1.enable/disable interleave mode.
2.enable/disable slumber mode.
3.Reserved blocks setting (you can see RDutility\MPtool_ini_notes.JPG)
4.tADL >100ns

MP tool vA.0.1
1.Format function modified. 
2.Version modified.
3.Autio search modified.

MP tool vA.0.3
1.SSD Disk information check issue correct .



